ZBQ27 / 1.5 pneumatic injection pump ZBQ injection pump meaning

ZBQ-27 / 1.5 mine pneumatic injection pump symbol meaning: ZB type code: coal mine with piston injection pump; Q Feature Code: power source type pneumatic; 27 / 1.5: the discharge flow / discharge pressure. Today's latest valid order information free to send! Morning latest buyers information free to send! Punch grab Rob here! The pump weighs only 16KG Has a small body easy to move, easy to operate on the absolute advantage, to deal with high humidity, flammable and temperature changes in large places, suitable for slurry, water, hydraulic oil emulsion medium. Mostly used in the construction of bridges, tunnels, water conservancy, mines, buildings, subways and so on, for the grouting and water blocking, filling voids, etc., and soft foundation treatment, especially in the underground coal mine flood control and rescue hidden trouble rock The grouting consolidation, grouting anchor, also used to repair roads, road subgrade dip and other local defects. It is forbidden to use the pump at no-load or light-load speed to avoid damaging the moving parts. Air source shall not exceed 0.8Mpa. In the construction site grouting pump should be put into the pulp mouth upside down to avoid the intake manifold and exhaust hood into the debris. ZBQ-27 / 1.5 mine gas injection pump main technical parameters are as follows: Piston travel 100mm Consumption 0.5m3 / min Paoding pressure 1.5MPa The amount of discharge 27L / min Reciprocation frequency ≤150 / min Ventilation diameter 3/4 Air pressure 0.5MPa