Lecture Hall magnetic pump system: ZCQ self-priming magnetic pump

Pump family members have evolved to a considerable family, ZCQ self-priming magnetic pump is one of the generals, and in the pump industry occupies a very important place, and now Xiaobian band With everyone together to briefly understand this general, see it any magical powers! ZCQ self-priming magnetic drive pump (hereinafter referred to as self-priming pump) The pump to replace the dynamic seal sealed, so that the pump over-current components in a completely sealed state, completely solve the other pump mechanical seal can not be run, run, drop , Leakage of the shortcomings of the pump body and the flow of components are made of corrosion-resistant stainless steel, steel jade ceramics, PTFE graphite and other materials, both CQ-type magnetic drive pump function, but also set a soap sucked in one, not At the end of the valve and irrigation water, self-priming height of 4 meters. Product Features The self-priming pump has the advantages of compact structure, beautiful appearance, small volume, low noise, reliable operation and easy maintenance. It can be widely used in the fields of petroleum, chemical, pharmaceutical, electroplating, printing and dyeing, food and scientific research, Class and rare precious liquid, venom, volatile liquids, and water equipment supporting circulation, especially easy to leak, flammable, explosive liquid pumping. The use of self-priming pump 1, the pump should be checked before use, the motor blades to be flexible rotation, no stuck and abnormal sound, the fasteners to be solid. 2, unscrew the pump above the water bolt, add not less than two-thirds of the reservoir water volume, tighten the bolts. 3, connected to the power trial about, from the motor side, the operation is consistent with the fruit steering mark. 4, the pump stopped working, first close the discharge valve, then turn off the power, and finally close the suction pipe valve. ZCQ self-priming magnetic pump structure ZCQ-type self-priming magnetic pump (working principle) The pump uses external mixed axial backwater pump body structure, the pump body from the suction chamber, the liquid chamber, the volute, the return hole, gas Liquid separation chamber and other components, the structure shown in Figure one. Pump start, under the action of centrifugal force, the remaining liquid in the suction chamber and the inlet pipe air is stirred into an air mixture by the impeller, the mixture into the gas-liquid separation chamber through the volute, as the speed slows down, resulting in gas Water is separated, the air is discharged from the pump liquid outlet, and the liquid is returned to the pump through the water return hole. After several cycles, the air in the liquid inlet pipe is drained out to make a certain degree of vacuum in the pump to achieve the self-priming effect. Through the above brief introduction, I believe everyone for the ZCQ self-priming magnetic pump has a general understanding, and there will be some of their own ideas, but in order to make good use of this model pump, or you need to practice colleagues And concluded. This article belongs to Industrial Internet (Xiamen) Technology Co., Ltd., without written authorization, is forbidden to reprint, offenders will be held criminally responsible. Author: Asian pumps Network Editor: Ko Muk available (QQ / micro-channel: 97,129,095) starting: http: //beng.liuti.cn/ (service hotline: