Zeus pump R & D generation anti-corrosion wear-resistant pump (Figure)

Nearly 30 years, in the chemical industry, smelting, environmental protection industry, commonly used non-metallic anti-corrosion centrifugal pumps, often lined with plastic and plastic two. From the long-term use of the situation, each has its own advantages and disadvantages. Lining plastic pump has the advantages of high temperature resistance, good mechanical stability, easy installation; shortcomings of the first anti-corrosion and non-corrosion, the second is due to the plastic layer and the metal expansion coefficient, easily lead to lining off, cracking. The advantages of plastic pump is easy to manufacture, both inside and outside anti-corrosion; drawback is the production of plastic pump base material thermal coefficient of variation, the pump, pump cover prone to thermal deformation, compression (force) deformation, tensile (force) The mechanical stability of the pump and the reliability of the shaft seal have an impact, affecting the operating costs of the pump. Based on the above, Zeus pump summed up nearly 30 years experience in manufacturing lined plastic pump and plastic pump experience, research and manufacture of steel skeleton plastic pump (see product map), to overcome the shortcomings of the above two pumps : Deformation, cracking, delamination, non-corrosion, while retaining the common advantages of the above two pumps: internal and external corrosion, pump anti-deformation ability, reliable and stable seal, installation performance, easy to manufacture, affordable and so on. The series of pumps used by more than 200 users, have a good rating: not only reliable, stable quality, and affordable, cost-effective (better than conventional pump price advantage), is a replacement type anti-corrosion pump. The series of pumps after nearly two years of pre-production preparation technology, and now develop a full range of more than 150 kinds of specifications, and enter the high-volume production stage, to meet customer demand for production and service capabilities. To meet the needs of users of all types of production, the series of pumps can be equipped with different types of shaft seals, such as mechanical seals, power seals, etc., to meet the user's needs for different conditions such as conveying slurries or clear liquids. In overcurrent material, also equipped with "U00" modified ultra-high molecular weight polyethylene (high wear-resistant type), this material in conveying high abrasive slurry, the service life nearly doubled, the advantage is more Outstanding, it is more suitable for wet smelting, environmental slag, non-metallic mineral processing and other industries. Structural features: UHMW-PE pump housing, built-in steel skeleton, both the advantages of anti-corrosion plastic pump inside and outside, there are plastic lined steel pump performance, ease of installation advantages. For: wet non-ferrous metal smelting, chemical, environmental protection, phosphate compound fertilizer, titanium dioxide and other industries in a variety of slurry, the transmission of liquid, suitable for temperature less than 105 ℃, anti-corrosion wear.