Fire pump controller stop pump method?

XZQP series, XZQB series of fire pump control equipment is designed and produced in accordance with the national fire safety standards GBJ16-1987 "architectural design code for fire protection" and GB50045-1995 "high-rise residential building design code for fire protection", designed for high and low Layer industry, civil construction fire, sprinkler, water curtain, fire hydrant pipe and other feed pump control, to meet the user on a variety of different fire pump control. Today to introduce the fire pump controller which pump stop method. Fire pump controller fire control equipment set manual, automatic control mode, manual operation of the device button on the control panel start and stop the pump, automatically by any of the following centralized control of the pump start and stop: 1, Fire Center DC24V start (power provided by the fire center); 2, each hydrant button switch to start; 3, the fire center button to control the start and stop the pump; 4, spray pipe network pressure switch starting and stopping pumps; 5, electric contact pressure gauge low pressure start Pumps (should have a voltage regulator system) and so on. Lead to the hydrant button, signal lights and lead to the fire control center remote control power supply is AC24V. 100V. Control cabinet has a pump open, pump stop, pump fault passive contact feedback fire center. With the main pump failure, standby pump automatically delay the input function. In addition, the control cabinet can be based on user needs, an increase of dual power automatic switching function, regular automatic inspection and other functions, high-power fire main pump can be used to ease the start-up of the pump on the power grid and pipe network impact. Further Reading: Pumps Valves pipe fittings Exhibition 2016 Exhibition of Information Industry, Internet (Xiamen) Technology Co., Ltd. Author: Asian pumps Network Editor: Yao Xiaoxia (QQ / micro-channel :) (service hotline:)