Which is good for the fryer stainless steel pump, how to maintain the fryer stainless steel pump?

Fryer stainless steel pumps Which is good, how fryer stainless steel pump maintenance? Stainless steel pumps can transport a variety of different media from tap water to industrial liquids, adapt to different temperatures, flow and pressure ranges, non-corrosive or light corrosive liquids, so stainless steel pumps are widely used in industry, manufacturing, etc., although stainless steel pumps look It seems to be very powerful, but it also needs maintenance. Recently, many small partners asked how to maintain the stainless steel pump of the small fryer. So today, Xiaobian will explain how to maintain the fryer stainless steel pump.

First of all, we need to know what is the fryer stainless steel pump which is good

Fryer stainless steel pump introduction:

It is an axial suction type outlet eccentric high-temperature medium transfer circulating centrifugal pump. The transfer circulating medium is a liquid (water and heat transfer oil) containing no particles and fibers. It has the characteristics of simple installation, high temperature resistance, large flow and wide application. Mainly used in high-power mold temperature machine, pipeline pressurization, boiler water recycling system, woodworking machinery, wind energy technology auxiliary heating equipment and other industries. It is a heating cycle transfer device for high temperature water and high temperature oil heaters. It has the characteristics of large flow, direct connection and high temperature resistance. Widely used in high-power mold temperature machines, water heaters, oil heaters, heat transfer oil furnaces, pipeline pressurization systems, etc.

Fryer stainless steel pump way:

1. Ultra-high temperature mold temperature machine, oil heater, rubber mechanical mold temperature machine and other high temperature temperature control equipment;

2. Hot water type horizontal heat pump is suitable for hot water pressurized conveying of energy, metallurgy, bathroom, hotel and other boilers;

3. Large flow booster pump in various sets of temperature control equipment;

4. The transportation of high temperature heat medium such as hot oil and fuel.

Fryer stainless steel pump product accessories:

Olenko - Fryer stainless steel pump knowledge:

Stainless steel pump maintenance:

1. When the stainless steel pump is fastened to the end face bolt, the force of the stainless steel pump should be symmetrical and uniform; If a jam occurs, the stainless steel pump should loosen the bolt and tighten.

2. The drive shaft of the electric pump cannot bear any radial vertical force, and the lateral drive mode such as belt, chain and gear is prohibited.

3. The connection between the strong drive shaft of the base plate and the motor shaft adopts a flexible coupling or a chain coupling.

4. The gear oil should be enough. Don't take a long time. The bottom plate of the pump is soft, which causes the motor and the pump to be misaligned and damage the pump.

5. Find out the maximum allowable speed of the pump and the maximum speed of the field work.

6. Be sure to let the fluid enter the inlet and try not to dry and idling.

How can the stainless steel pump be used longer:

1 Try to control the flow rate and head of the pump within the range indicated on the sign to ensure that the pump runs at the highest efficiency point to obtain the maximum energy saving and high efficiency.

2 Observe the vibration and noise of the whole pump on time. If there is any abnormality, it is generally into the impurity or the bearing is damaged. Please replace the bearing or remove the impurities immediately.

3 Check the pump and the pipeline and the joints for looseness.

4 Close the gate valve and outlet pressure gauge and inlet vacuum gauge of the outlet pipe. Unscrew the water plug screw of the pump pump body and infuse the water.

For more information, stay at GO Home

Source: GO Jiaju

related articles

What are the advantages of a sheet-film extruder hot water pump? Which sheet of film extruder hot water pump is good?

What are the advantages of the extruder roller heating circulation pump? Which extruder roller heating circulation pump is good?

What are the advantages of the laminator hot oil circulation pump? Which laminator hot oil circulation pump is good?

What are the advantages of the veneer hot oil circulation pump? Which veneer hot oil circulation pump is good?

What are the advantages of the hot press heat transfer oil pump? Which hot press heat transfer oil pump is good?

Which is better for cold water pump? What are the characteristics of the cold water pump?

Which stainless steel pump is better? What are the characteristics of stainless steel pumps?

Which is a high temperature magnetic pump? How much is the high temperature magnetic pump?

Which mold temperature pump is better? What are the characteristics of the mold temperature pump?

Kunshan Company KUNSHAN COMPANY

Address: No. 228 Wulian Road, Yushan Town, Kunshan City, Jiangsu Province

Add:#228 Wulian Road,Yushan Town,Kunshan City,Jiangsu

Phone/Tel: 15962508164 Miss Tube

Fax/Fax: +86-512-55193433

E-mail:

Http://