Blue Precision Pump Industry | FSB Series Fluoroplastic Corrosion Resistant Pump Start and Stop

Blue Precision Pump Industry | FSB Series Fluoroplastic Corrosion Resistant Pump Start and Stop FSB Series Fluoroplastic Corrosion Resistant Pump Start and Stop:

1. Check the running direction of the motor, whether it is consistent with the direction of rotation of the pump;

2. Check whether the oil level in the oil chamber of the bracket is within the specified range before starting the FSB pump;

3. Open the inlet valve and fill the pump with liquid (injection);

4. Close the outlet valve;

5. After the above steps are completed, start the motor and slowly open the outlet valve. At this time, the position of the pressure gauge changes with the size and change of the water outlet. When the gauge pointer points to the required position, the adjustment of the outlet valve is stopped.

6. When parking is required, first close the water outlet valve, cut off the power supply, and then close the inlet valve.

Wenzhou Lanjing Pump Industry Valve Co., Ltd. specializes in producing fluorine plastic corrosion-resistant pumps.

This article reprinted: http://